're done, the project that I had to reveal ...
Tired of having to clean the filter cleaner that connects the gear every 10 minutes, I thought why not put a filter before?
higher than in the photo is a simple suction drum all (powders and liquids) to which I connected the filter that I made yesterday.
is no other than an empty container of paint than with the metal clamp for closure.
on the plug I made two holes: one (which is the far right) runs from the vacuum cleaner in the other (the one with the black tube) connects the power tool.
The black tube reaches about 5 cm from the bottom of the bucket, then fill the cylinder with 10 cm of water.
When you turn on the vacuum inside bucket of a vacuum is created and the only way that the air entering through the tube is immersed, thus creating a flow of air through the water to produce a movement of this (also quite strong).
dusts that enter into the bucket, coming into contact with water become heavy and are not drawn in by the suction drum so that all of that always keeps the filter free from them.
Today I did the first test, after two hours of the bin has not lost the least power. Inside the bin
suction everything there was about half inch of water.
0 comments:
Post a Comment