Inebrya Ice Cream Oxidizing Emulsion

il tetto ventilato del soggiorno e del bagno

this was certainly the most significant and challenging work to date facts.
Beyond party wall required, the most challenging part was the treatment of the existing truss, (100% healthy for luck). Here, too, and so much Timpest primer, all for a philosophy that such an operation should be performed once in a lifetime (at least thirty years this roof should last!).

The sky in one room!

While we were just dealing with the existing, infinite patience with my father was on the ground in sand and prepare beams of recovery that I had purchased this spring to make the portion of the roof of the extension.
Then it was time to bring them all to shape the heads.
After that, we put them in place. leveled and aligned, to constrain the existing beams I used the screw type of rothofer sch 8mm in diameter and 26cm in length (the veritable "wild beasts") the problem was screwed, nothing to do with electric drills and hammers, I used Air an impact screwdriver with a whopping 500 Nm of torque. Total
vine to the roof of this type 200pz ... (... for € 0.63 per piece)

Fixed the beams on the wall also came the time to cover the pitch with the beaded already dealt with the poison and a coat of primer (unfortunately I have listened to the advice given after laying the second coat, I will not do anymore).
I then applied the vapor barrier, I used the delta of the delta fol pve.

The "layer" is the next proper roof ventilation, the 'ev airwood of isoltop .

Monte has been very simple with the tile pattern I found on their website, I've also used here to secure the screws sch but this time from 6mm to 20cm, and the only error that I think I did (that cocky eh!) is not having used a drill with a countersink because contrary to what he says rothob tab of the screws in my opinion on panels such as OSB dell'airwood, the screw head if it is too tight in place to create a widened breaks the panel.
few screw heads remained a couple of millimeters off but when I laid the bitumen did not create any problems.
Oh, I almost forgot, all the "plumbing" to not ruin it I left it by providing the other work on the roof.
order to apply then the brackets of the gutters and the "converse" on the edges I left the detached sheath to about 60cm.

looks like a casino to make a roof but it is not, there's only so much work ....